-1000x1000.jpg "San an chip 26-28LM 0.2W 5050 smd led diode")
-270x270.jpg "San an chip 26-28LM 0.2W 5050 smd led diode")
-270x270.jpg "San an chip 26-28LM 0.2W 5050 smd led diode")
-270x270.jpg "San an chip 26-28LM 0.2W 5050 smd led diode")
San an chip 26-28LM 0.2W 5050 smd led diode
SMD led 5050 Full Description
SMD led 5050 refers to the size of this SMD LED product which is 5.0x5.0mm in length and width (thickness is generally about 1.6mm); RGB5050 refers to the LED internal packaging of several grains, generally divided into single crystal, double crystal, three crystal three; Single crystal is this product only encapsulates a grain, so can only emit a color of light; Twin-crystal is a product that encapsulates two grains and emits three colors of light; Tri crystal is a product that encapsulates three grains, which are generally sealed with red, green and blue light of three primary colors, so at least seven colors of light can be emitted.
Detailed Introduction
5050 SMD LED Parameter:
| Color | Dominant Wavelength (nm)(k) | Luminous Intensity (mcd)(lm) | Viewing Angle 50% | Forward Current (mA) | Forward voltage (V) |
Power (W) |
| Blue | 460-470nm | 150mcd | 120° | 20mA | 2.8-3.0V | 0.06W |
| Luminous Green | 510-530nm | 200mcd | 120° | 20mA | 2.8-3.0V | 0.06W |
| Green | 570-575nm | 300mcd | 120° | 20mA | 2.0-2.2V | 0.04W |
| Yellow | 590-598nm | 150mcd | 120° | 20mA | 2.0-2.2V | 0.04W |
| Orange | 600-610nm | 150mcd | 120° | 20mA | 2.0-2.2V | 0.04W |
| Red | 620-630nm | 200mcd | 120° | 20mA | 2.0-2.2V | 0.04W |
| White | 6000-7000K | 800mcd | 120° | 20mA | 2.8-3.0V | 0.06W |
| Red+Blue | 460-470nm | 150mcd/200mcd | 120° | 40mA | 2.0-2.2V/2.8-3.0V | 0.1W |
| Red+Green | 460-575nm | 150mcd/300mcd | 120° | 40mA | 2.0-2.2V/2.8-3.0V | 0.1W |
| RGB | 460-575nm | 150mcd/300mcd | 120° | 60mA | 2.0-2.2V/2.8-3.0V | 0.18W |
| Cold White | 9000K- | 22-26lm | 120° | 60mA | 2.8-3.2V | 0.25W |
| Warm White | 2500-3500K | 22-26lm | 120° | 60mA | 2.8-3.2V | 0.2 |
Features
■ Package Size：5.0 (L) × 5.0(W) × 1.85 (T) mm
■ Silicone Packed
■ Suitable for different working environment
■ Super long lifetime：40000HRs
■ Anti UV
■ White colors are available in red、orange、blue、green
■ Wide viewing angle (2θ1/2=120°)
Applications OF SMD LED 5050
■Indoor lighting:
Fluorescent lamp, tube, bulb etc.
■ Commercial illumination and displays:
Advertising words, light box
■ LCD Backlighting (including LED TV )
■ Decorative lighting: light strip
■ Automotive interior auxiliary lighting: reading lamp
■ Mobile flashlights
■ Luminaries lighting source: Cabinet light, corridor light
Package Outline Dimension
.jpg)
Remark: PartⅠis our featured product，PartⅡ is the product that is available to provide.
Recommended solder pad for led SMD 5050 series
Note: The tolerances unless mentioned is ±0.01 mm.
Absolute Maximum Ratings (Ta=25℃)
| Parameter | Symbol | Rating | Unit |
| Reverse Voltage | VR | 5 | V |
| Forward Current per LED | IF | 25 | mA |
| Operating Temperature | Topr | -20 ～ +80 | ℃ |
| Storage Temperature | Tstg | -20 ～ +80 | ℃ |
| Soldering Temperature | Tsol | 260(for 5 seconds) | ℃ |
| Power Dissipation | Pd | 250 | mW |
| Peak Forward Current
|
IFP | 300 | mA |
Electro-Optical Characteristics（Ta=25℃）
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Condition |
| Viewing Angle | 2θ1/2 | ----- | 120 | ------ | deg | If=60mA |
| Reverse Current | IR | ----- | ----- | 50 | μA | VR=5V |
Notes:
Tolerance of Luminous Intensity is ±15%.
Tolerance of Forward Voltage is ±0.1V.
Bin Range of Luminous Intensity
| Color | Dominant wavelength（nm） λD@ 60mA |
Forward Voltage(V) Vf@ 60mA |
Luminous Intensity(mcd) IV@ 60mA |
Part Number | ||||
| Min. | Max. | Min. | Max. | Group | Min. | Typ. | ||
| White | 2000k | 7000k | 2.9 | 3.5 | B1 | 18LM | 26LM | MY-5050W-XX |
| Royal Blue | 455 | 465 | 2.9 | 3.5 | C1 | 450 | 600 | MY-5050RB-XX |
| Blue | 465 | 475 | 2.9 | 3.5 | C1 | 450 | 600 | MY-5050B-XX |
| Green | 515 | 535 | 2.9 | 3.5 | F1 | 1500 | 2000 | MY-5050G-XX |
| Amber | 585 | 595 | 1.8 | 2.4 | D2 | 900 | 1200 | MY-5050A-XX |
| Orange | 600 | 615 | 1.8 | 2.4 | D2 | 900 | 1200 | MY-5050O-XX |
| Red | 620 | 635 | 1.8 | 2.4 | D2 | 900 | 1200 | MY-5050R-XX |
| P | 395 | 400 | 3.0 | 3.4 | D2 | 200 | 300 | MY-5050R-XX |
Note:
1. Please take Luminous Flux as standard parameter, Luminous Intensity is only for reference.
2.Tolerance of Luminous Intensity is ±15%.
.jpg)
.jpg)
.jpg)
Directive Characteristics
.jpg)
Reflow Temp/Time
Handing of an SMD LED 5050Should be done only when the Package has been cooled down to below 40℃ or less. This is to Prevent SMD LED 5050 failures due to thermal-mechanical stress during handing.
Reflow soldering
Temperature (top surface of the SMD LED 5050)profile:
1.Use with all SMDs
Solder=Sn63-Pb37
Average ramp-up rate= 4℃/sec.max.
Preheat temperature:100°～150℃
Preheat time =120sec.max.
Ramp-down rate = 6℃/sec.max.
Peak temperature = 230℃max
Time within 5℃ of actual peak temperature = 10 sec.max.
Duration above 183℃ is 60 sec.max.
2.Solder = Lead-Free
Average ramp-up rate = 4℃/sec.max
Preheat temperature:150～200℃
Preheat time =120 sec.max.
Ramp-down rate = 6℃/sec.max.
Peak temperature = 250℃ max.
Time within 5℃ of actual peak temperature =10 sec.max.
Duration above 217℃ is 60 sec.max.
Test circuit
.jpg)
Handling precautions
1. Over-current-proof
Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen).
2.
2.1 When necessary, cleaning should occur only with isopropyl alcohol (IPA) at room temperature (25ºC) for a duration of no more than one minute. Dry at room temperature for 15 minutes before use.
2.2 The influence of ultrasonic cleaning on the SMD LED 5050 depends on factors such as ultrasonic power and the way the SMD LED 5050 are mounted. Ultrasonic cleaning should be pre-qualified to ensure this will not cause damage to the SMD LED 5050.
3. Storage
3.1It is recommended to store the products in the following conditions
Humidity: 60% R.H. Max.
Temperature: 5℃~30℃(41℉~86℉): 5℃~30℃(41℉~86℉)
3.2 Shelf life in sealed bag: 12 month at ＜5℃~30℃ and ＜30% R.H. after the package is opened, the products should be used within 24hrs or they should be kept stored at ≦20% R.H. with zip-lock sealed.
4. Baking
It is recommended to bake before soldering when the pack is unsealed after 72hrs. The conditions are as followings:
4.1 80±3℃ x(10~12hrs) and ＜5%RH, taped reel type
4.2 100±3℃ x (1hr~2hrs), bulk type
4.3 130±3℃ x (45min ~1hr), bulk type